The correct use of single temperature freezer horizontal commercial

In the context of energy saving, environmental protection, low carbon is becoming more and more a general consensus, as a home appliance enterprise, only continue to develop energy saving, low carbon and environmental protection electrical products, in order to keep pace with the times, to win the recognition and favor of consumers.

First, the freezer should pay attention to whether the location of the placement is reasonable and whether it is easy to dissipate heat. And also need to check the family's power supply situation, whether it is grounded, whether it is a dedicated line.

Second, before use, users should carefully read the accompanying product manual, check the various components. Usually use the power supply is mostly 220V, 50Hz single-phase AC power supply, normal operation, voltage fluctuations allowed between 187-242V, if the fluctuations are very large or high and low, will affect the normal operation of the compressor, and even burn the compressor.

Third, the freezer should use single-phase three-hole socket, separate wiring. Pay attention to the protection of the power cord insulation, do not press the wire, do not change or lengthen the power cord at will.

Fourth, after checking the correctness, it should be left to stand for 2 to 6 hours before turning on the power, so as to avoid oil circuit failure (after handling). After connecting the power supply, listen carefully to the compressor in the startup and operation of the sound is normal, whether there is the sound of the pipeline touching each other, if the noise is too large, check whether it is placed smoothly, whether the various pipelines are in contact with each other, and make adjustments accordingly. If there is a large abnormal sound, you should immediately cut off the power supply, and contact with professional repair personnel.

Fifth, when you start using it, you should run it with reduced load, because the new moving parts have a break-in process. Run for a period of time before adding a large amount, which can extend the life.

Sixth, for the first time, the storage of food can not be too much, to leave the appropriate space to maintain the circulation of cold air, try to avoid a long time full load. Hot food should be cooled to room temperature before putting in, so as not to cause the freezer for a long time without stopping. Food should be sealed with plastic bag or plastic paper or put into a sealed container, which can prevent the food from moisture, water loss, string flavor. Food with water should be removed and put into the water, so as not to form too much frost due to the evaporation of large amounts of water. Note that the freezer should not be placed liquid, glassware to prevent frost damage. Volatile, flammable chemicals, corrosive acid and alkali items should not be placed in order to avoid damage.